Hydraulic cylinder repair is necessary, as is maintenance because these processes are crucial, so they should be implemented regularly to help keep problems at bay. Regular maintenance will allow you to detect problems early on, and you will have the opportunity to repair them while they are still minor. You will have the chance to take care of any issues before they become serious, so you will not face major destruction and will experience little or no downtime because major repairs will be avoided.

There are three main components on which the functioning of hydraulic cylinders depend on, and these need to be checked thoroughly during every maintenance check to ensure they are functioning properly.

The following three tips will ensure your cylinder components remain in good shape:

Check the Rods

This is the most important component within a hydraulic cylinder, and if this part is bent, it will not be able to function and will cause disruption in the functioning of your cylinder. Failure of the rod seal will cause the rod to bend, and a seal can fail in the absence of proper lubrication or if it is loaded beyond capacity. Once your seal fails, your rod will experience excessive pressure and will bend and depending on the severity of the situation, it’s also possible for the load to be dropped from the rod.

Check Your Seals and Bearings

Only compatible seals should be installed on your device, and only seals with requisite dimensions should be used. Additionally, you should also check your seals regularly for lubrication and repair. Seals are considered a small component, but their failure can cause severe damage to your machine, so you must monitor the seals and bearings.

Reduce Friction

A rough rod will cause friction and increase the machine’s load. It will also increase the power and hydraulic fluid consumed by the machine because a rough surface will rub against the cylinder, which will cause damage. To prevent this from happening, your rod should be polished and finished regularly, as this will ensure a smooth surface at all times.

It’s important to remember that your hydraulic cylinder will function as the heart of your machinery, so it is a must that the proper steps are taken to maintain your machine and its components. Small problems can easily turn into serious and costly issues if they are not addressed on time, so make sure you follow the three tips listed above so that you don’t run into any major problems with your machinery. It is also recommended that you look out for leaks, odd sounds, slow cycle times and overheating because these issues will also require repairs.

If you have any questions or concerns regarding hydraulic cylinder repairs, the experts at GO Hydraulics can help. We can provide you with additional maintenance tips, so if you’d like more information, contact us today!